Whether you are replacing a burnt-out factory headlight bulb, installing new halogen bulbs, or upgrading your Ski-Doo Gen 4 or Lynx snowmobile to LED headlights, the first part of the job is the same: accessing the factory headlight housing, removing the existing bulbs, and correctly installing the replacements.

In this guide, LEDPowersport® walks through the complete headlight bulb replacement process on a Ski-Doo Gen 4 snowmobile and installs our 10,000-lumen RGB LED Headlight Kit. The video also demonstrates proper LED positioning, the RGB controller connection, smartphone app setup, color-changing functions, and normal white high and low beam operation.

The basic headlight removal and replacement portions of this guide are also useful if you are simply changing a failed factory halogen bulb and are not upgrading to RGB LEDs.

Watch the complete installation above or continue below for an in-depth explanation of the process.

Ski-Doo Gen 4 Headlight Bulb Replacement and LED Upgrade

The factory headlight housing on applicable Ski-Doo Gen 4 snowmobiles uses replaceable bulbs. Because of that, this guide can help with several different headlight jobs.

• Replacing a burnt-out Ski-Doo headlight bulb
• Removing the original factory halogen bulbs
• Installing replacement halogen bulbs
• Upgrading a Ski-Doo Gen 4 from halogen to LED headlights
• Installing LEDPowersport® RGB LED headlights
• Installing headlights in applicable Lynx snowmobiles using the same bulb configuration

If your only goal is to replace a failed factory bulb, the headlight access, connector removal, bulb removal, and replacement portions of the video are still applicable. The additional controller wiring and smartphone setup shown later in the video are specifically for the LEDPowersport® RGB system.

What Headlight Bulb Does a Ski-Doo Gen 4 Use?

For the Ski-Doo Gen 4 and applicable Lynx snowmobiles covered by this installation, select the H13 bulb option when ordering the LEDPowersport® RGB LED Headlight Kit.

Because snowmobile bulb configurations can vary by year, model, package, and headlight assembly, always verify the required bulb style for your exact machine before ordering.

For the application demonstrated in this installation:

• Bulb type: H13
• Application: Applicable Ski-Doo Gen 4 and Lynx snowmobiles
• LED kit shown: LEDPowersport® RGB LED Headlight Kit
• White-light output: 10,000 lumens
• Functions: White high beam, white low beam, and app-controlled RGB lighting

How to Change a Ski-Doo Gen 4 Headlight Bulb

The following steps cover the general process demonstrated in the video. Always work carefully around the factory plastics, connectors, wiring, and headlight housing.

1. Access the Ski-Doo Headlight Housing

Begin by accessing the rear of the factory headlight assembly. On the Ski-Doo Gen 4 shown in the video, fasteners and the appropriate body components are removed so the rear of the headlight housing and electrical connections can be reached.

Take your time during disassembly. Snowmobile body panels and tabs are designed to fit together closely, and forcing a panel can damage a mounting point or plastic tab.

2. Locate the Factory Headlight Bulbs

Once the headlight area is accessible, locate the electrical connectors and the rear of the factory bulbs. Before removing anything, take note of how the factory wiring is routed so it can be returned to a safe position after the new bulbs are installed.

3. Disconnect the Factory Bulb Connector

Disconnect the factory electrical connector from the existing bulb. Pull on the connector itself rather than pulling on the wiring.

This step applies whether you are installing another halogen bulb or replacing the factory lighting with LEDs.

4. Remove the Existing Headlight Bulb

Unlock the existing bulb from the factory headlight housing and carefully remove it.

If you are replacing a burnt-out halogen bulb with another halogen bulb, install the correct replacement bulb using the appropriate handling procedure for that bulb.

If you are upgrading to LED headlights, continue with the LED installation and positioning steps below.

Installing LED Headlight Bulbs in the Factory Housing

Install the LED bulb into the same factory headlight opening used by the original bulb. Make sure the bulb is completely seated and locked into place.

Correct installation is important. An LED bulb that is not fully seated or is positioned incorrectly can affect how the factory reflector directs the light.

Why LED Bulb Positioning Matters

A headlight reflector is designed around a specific light-source location. When converting from halogen to LED, the location and orientation of the LED emitters inside the housing matter.

Simply putting an extremely bright LED into the housing does not automatically create a good beam pattern. The LED emitters need to be positioned correctly so the factory reflector can direct the light where it belongs.

The LEDPowersport® RGB bulbs shown in this video feature a 360-degree indexable design. This allows the bulb to be rotated and positioned for the particular headlight housing.

360° Indexable LED Headlight Design

The ability to index the LED bulb means the LED assembly is not limited to a single fixed orientation after installation.

After the bulb is seated in the housing, its position can be adjusted so the LEDs are properly oriented within the reflector.

This is especially important when upgrading snowmobile headlights because different headlight housings can position and reflect light differently.

LEDPowersport® RGB LED Headlights for Ski-Doo Gen 4 and Lynx

The LED headlights installed in this guide are the LEDPowersport® 10,000-lumen RGB LED Headlight Kit.

This system is designed to provide both functional white lighting and customizable RGB lighting. You do not have to give up your normal white headlights just to add color-changing capability.

• 10,000-lumen white headlight output
• White high beam
• White low beam
• App-controlled RGB colors
• Smartphone control
• Multiple colors
• Adjustable RGB functions and effects
• 360° indexable LED design
• H13 option for applicable Ski-Doo Gen 4 and Lynx applications

Connecting the RGB LED Headlight System

Once the bulbs themselves are installed and positioned, the RGB portion of the system can be connected.

The RGB controller provides the connection required for smartphone-controlled color functions. The installation video demonstrates how the system is connected and how the RGB controls are set up.

Route wiring carefully and keep wiring away from hot, sharp, or moving components. Make sure connectors and wiring are secured before reinstalling the snowmobile's body panels.

Setting Up the RGB Headlight App

The RGB lighting functions can be controlled from a compatible smartphone using the app associated with the RGB controller.

The video demonstrates the app setup and several of the available lighting functions, including changing the visible headlight color directly from a cell phone.

Depending on the selected settings, riders can choose from different colors, brightness settings, and RGB lighting effects.

Can You Still See at Night With RGB Headlights?

Yes. One of the important features of the LEDPowersport® RGB kit is that the system also provides a powerful 10,000-lumen white high and low beam for normal nighttime use.

The RGB capability is an additional feature rather than a replacement for normal white headlight operation.

That gives you the ability to use white lighting when riding at night while also having the option of changing your headlight colors from your phone when desired.

Replacing Factory Halogens With LEDs

If your Ski-Doo currently has halogen headlight bulbs and you want to upgrade to LEDs, the physical bulb replacement process begins in essentially the same way as replacing a failed halogen bulb.

1. Access the rear of the factory headlight housing.
2. Disconnect the existing bulb.
3. Remove the factory halogen bulb.
4. Install the correct replacement LED bulb.
5. Make sure the LED is completely seated.
6. Position or index the LED correctly if the bulb design allows adjustment.
7. Reconnect the headlight wiring.
8. Test high and low beam operation.
9. Secure all wiring.
10. Reinstall the removed panels and fasteners.

Replacing a Burnt-Out Ski-Doo Gen 4 Halogen Bulb

If you are not upgrading to LEDs and simply need to replace a burnt-out factory halogen bulb, you can still use the beginning of the installation video as a reference for accessing the housing and removing the bulb.

Install the correct replacement bulb for your exact year and model, reconnect the factory electrical connector, verify operation, and reinstall the components that were removed for access.

Ski-Doo Gen 4 LED Headlight Installation Tips

• Verify the correct bulb type before ordering.
• Do not force electrical connectors.
• Make sure the bulb is completely seated in the housing.
• Follow the bulb manufacturer's handling instructions.
• Keep wiring away from moving components.
• Keep wiring away from excessive heat and sharp edges.
• Properly position indexable LED bulbs.
• Test both high and low beam before completely reassembling the machine.
• Confirm the headlight beam is functioning properly after installation.
• Secure all wiring before reinstalling body panels.

Ski-Doo Gen 4 and Lynx LED Headlight Installation Video

The complete video at the top of this guide demonstrates the actual installation process and gives you a visual reference for removing the factory bulbs, installing the LED headlights, adjusting the bulbs, connecting the RGB components, setting up the smartphone app, and testing the lighting.

You can also watch the video directly on the LEDPowersport® YouTube channel:

Watch the Ski-Doo Gen 4 RGB LED Headlight Installation Video

Frequently Asked Questions

How do you change the headlight bulbs on a Ski-Doo Gen 4?

Access the rear of the factory headlight housing, disconnect the electrical connector, unlock and remove the existing bulb, and install the correct replacement bulb. The video in this guide demonstrates the process on a Ski-Doo Gen 4 snowmobile.

Can this guide be used just to replace a burnt-out halogen bulb?

Yes. The process for accessing the headlight housing and removing the existing bulb is useful even if you are only replacing a burnt-out factory halogen bulb. The RGB controller and smartphone setup portions apply specifically to the RGB LED kit.

Can I replace the factory Ski-Doo Gen 4 halogen bulbs with LEDs?

Yes, when using the proper LED bulb for the application. The replacement LED needs to fit and seat correctly in the factory headlight housing, and proper LED positioning is important for the reflector and beam pattern.

What bulb option should I select for the Ski-Doo Gen 4 RGB LED kit?

For the applicable Ski-Doo Gen 4 and Lynx snowmobiles covered by this installation, select the H13 option when ordering the LEDPowersport® RGB LED Headlight Kit. Always confirm fitment for your exact machine before ordering.

Do the LEDPowersport® RGB headlights still have a normal white headlight?

Yes. The kit provides a 10,000-lumen white high and low beam for normal nighttime riding in addition to the app-controlled RGB color-changing functions.

Can I change the RGB headlight colors from my phone?

Yes. The RGB system uses a smartphone app that allows the RGB headlight colors and compatible lighting functions to be controlled from your phone.

Why are the LED bulbs 360° indexable?

The 360-degree indexable design allows the LED emitters to be rotated and positioned inside the factory headlight housing. Correct positioning helps the factory reflector direct the light properly.

Does this installation also apply to Lynx snowmobiles?

The installation is applicable to Lynx snowmobiles using the same headlight and bulb configuration. Verify the required bulb style for your exact Lynx year and model before ordering.

Do I need to replace the complete headlight housing to install these LEDs?

For the bulb-replacement application demonstrated in this guide, the LED bulbs install into the factory headlight housing. The factory housing itself is retained.

Should I test the headlights before putting the snowmobile back together?

Yes. Test the headlight operation before final reassembly so you can confirm the bulbs, high and low beam functions, connections, and RGB system are operating correctly.

Shop LEDPowersport® RGB LED Headlights

The RGB headlights installed in this Ski-Doo Gen 4 installation are available directly from LEDPowersport®.

For applicable Ski-Doo Gen 4 and Lynx snowmobiles, select the H13 bulb option.

Shop LEDPowersport® 10,000-Lumen RGB LED Headlight Bulbs

For additional snowmobile LED headlights, fitment information, installation guides, and powersports lighting products, visit LEDPowersport.com.

LEDPowersport® — Built by riders, for riders.